Electrical Vibroflot 600mm 240kW Hydropower Station Foundation Compaction Machine For Complex Sites
Hydropower Station Foundation Compaction
,600mm Heavy Duty Vibroflot
,240kW Dam Foundation Vibroflot
240kW Electrical Vibroflot for Hydropower Foundations
The APV600-240E-H is engineered for water and electricity station foundations, where the load from the structure and the depth of the alluvial deposit both exceed normal building requirements. A 600 mm body carries a 620 kN vibration force and 26 mm amplitude, and the working depth reaches about 35 m.
Hydropower sites usually combine river bed gravel, sand lenses and silty clay in the same foundation pit, which is exactly the complex soil layer condition this machine was developed for. The overload rated drive train absorbs cobble resistance, and the paint coated 6 kV cable with a double sealed junction box keeps the electrical system dry in a wet foundation pit.
Key Features
- 600 mm heavy duty body with 620 kN force is sized for hydropower foundation loads
- 26 mm amplitude carries compaction points down to 35 m in thick alluvial deposits
- Reinforced frame suits both crane suspended and guide frame working modes
- Overload rated drive train handles cobble bands common in river bed strata
- Paint coated 6 kV cable and double sealed junction box for wet foundation pits
Technical Parameters
| Parameter | Value |
|---|---|
| Motor Power | 240 kW |
| Rated Current | 470 A |
| External Diameter | 600 mm |
| Max. Speed | 1450 r/min |
| Max. Amplitude | 26 mm |
| Vibration Force | 620 kN |
| Working Pile Diameter | 1500-1800 mm |
| Max. Working Depth | 35 m |
| Cable Insulation | Paint coated, 6 kV rated |
| Overall Length | 3400 mm |
| Weight | 5480 kg |
Applications
The unit is used for powerhouse foundation treatment, dam abutment densification, spillway and sluice subgrade improvement, and cofferdam base preparation. It raises the bearing capacity of the foundation and limits post construction settlement under the permanent structures.
The reinforced frame supports both crane suspended and guide frame working modes, so the same tool serves different site layouts. Share your geological section and we will propose a compaction point layout with expected bearing capacity improvement.