Hydraulic Concrete Pile Breaker for a Bridge & Highway Infrastructure Project in the Middle East
Project Location: Kingdom of Saudi Arabia
Product Supplied: Excavator-Mounted Hydraulic Pile Head Breaker + Square Pile Breaker
Client Type: International EPC Contractor
Application: Bridge pier foundation and highway overpass pile trimming
An international EPC contractor undertaking a bridge and highway interchange project in the Middle East needed to trim over 2,000 foundation piles — a combination of cast-in-place bored piles (Ø1,000 mm–1,500 mm) for bridge piers and square precast piles (450×450 mm) for approach ramps and abutments.
The project site was located in a high-temperature, high-dust desert environment, with strict safety regulations prohibiting workers from standing near piles while breaking was in progress. Conventional handheld breakers were ruled out on safety and productivity grounds, and the client required a pile cropping machine solution that could be deployed across multiple working fronts simultaneously.
- A hydraulic pile breaker for bored piles covering 1,000 mm–1,500 mm diameter
- A dedicated square pile breaker for 450×450 mm precast piles
- Heat-resistant hydraulic seals and dust-proof cylinder design suitable for 45 °C+ ambient temperatures
- Compatibility with both 30–40 T excavators (large piles) and 20 T excavators (square piles)
- Third-party inspection (SGS) and full documentation package for EPC compliance
APIE FOUNDATION EQUIPMENT (CHINA) LIMITED supplied a customized package combining two of our most popular excavator pile breaker configurations:
| Item | Specification |
|---|---|
| Model | APB-1500 Excavator Hydraulic Pile Breaker |
| Applicable Pile Diameter | 1,300 – 1,500 mm |
| Number of Modules | 12 |
| Working Pressure | 35 MPa |
| Breaking Force | 70 T per module |
| Cylinder Stroke | 250 mm |
| Machine Weight | 3,600 kg |
| Carrier | 30 – 40 T excavator |
| Special Features | High-temperature seal kits, dust-proof cylinders, reinforced hoses |
| Item | Specification |
|---|---|
| Model | APS-450 Square Pile Breaker |
| Applicable Pile Section | 400×400 mm – 450×450 mm precast piles |
| Cutting Points | 4-sided fixed frame with corner-positioned cylinders |
| Working Pressure | 35 MPa |
| Carrier | 20 T excavator |
Both models apply uniform static hydraulic pressure instead of impact force, ensuring a clean horizontal break without damaging rebar or generating micro-cracks in the pile shaft — a critical requirement for the bridge pier piles subject to lateral load design.
| KPI | Result |
|---|---|
| Total piles trimmed | 2,100+ (bored + precast) |
| Average breaking time per Ø1,500 mm pile head | 6 minutes |
| Average breaking time per 450 mm square pile head | 3 minutes |
| Rebar damage rate | 0% |
| Pile cap concrete preparation rework | None reported |
| Ambient temperature performance | Stable at 48 °C (site peak) |
The contractor deployed 4 sets of APB-1500 and 2 sets of APS-450 across separate working fronts, completing the pile head trimming works 9 weeks ahead of the baseline piling program and eliminating jackhammer-related safety incidents entirely.
*“APIE’s pile breakers performed flawlessly in extreme desert heat. The modular design meant one machine covered multiple pile sizes, and the square pile breaker was a perfect match for our precast yard. Documentation and SGS inspection were handled professionally.”*
— Equipment Manager, International EPC Contractor
- Modular design — one mainframe covers a wide range of pile diameters by adding or removing modules (600 mm–2,500 mm available)
- Rebar-friendly breaking — synchronized 360° radial pressure preserves reinforcement and pile integrity
- Excavator-mounted versatility — works with standard 20–40 T excavators or hydraulic pump stations for large diameters
- Low noise, low vibration — ideal for urban high-rise, bridge and marine foundation projects
- Full export support — SGS/BV inspection, OEM branding, spare parts and lifetime technical support
APIE FOUNDATION EQUIPMENT (CHINA) LIMITED is a professional manufacturer and exporter of foundation machinery and construction equipment accessories, including hydraulic pile breakers, vibratory hammers, piling rigs and drilling tools for round bored piles, square precast piles and marine foundation applications.
Tell us your pile diameter, concrete grade and excavator model — our engineers will recommend the most cost-effective modular pile breaker configuration within 24 hours.
- 📧 Email: apie@apiepiling.com
- 📱 WhatsApp: +86 189 2128 7030
- 🌐 Website: http://www.apiefoundation.com