Electrical Vibroflot 530mm 200kW Overload Rated Motor Forcing Through Dense Gravel Saves Stone
Overload Rated Motor 1.3 Times
,Dense Gravel Layer Penetration
,200kW Stone Saving Vibroflot
200kW Overload Rated Electrical Vibroflot
The APV530-200E-G is the heavy duty answer for dense gravel and cobble bands. A 200 kW motor drives a thick walled eccentric tube, and the whole drive train is rated for 1.3 times nominal torque, so resistance at the tip is absorbed as working load instead of a shutdown.
The 24 mm amplitude and 520 kN vibration force push the tool to about 26 m in dense gravel. Because refusal points become rare, operators complete each column in a single pass, and stone backfill volume per column falls by up to 30 percent on gravel dominant sites.
Key Features
- Overload rated motor holds 1.3 times rated torque for short term gravel resistance
- 24 mm amplitude with 520 kN vibration force penetrates dense gravel to 26 m
- Fewer refusal points means up to 30 percent less stone backfill per column
- Thick walled eccentric tube keeps vibration stable when the tip crosses cobble bands
- Paint coated 6 kV cable and sealed junction box for slurry filled boreholes
Technical Parameters
| Parameter | Value |
|---|---|
| Motor Power | 200 kW |
| Rated Current | 395 A |
| External Diameter | 530 mm |
| Max. Speed | 1450 r/min |
| Max. Amplitude | 24 mm |
| Vibration Force | 520 kN |
| Working Pile Diameter | 1300-1600 mm |
| Overload Capacity | 1.3 times rated torque |
| Max. Gravel Penetration | 26 m |
| Overall Length | 3200 mm |
| Weight | 4820 kg |
Applications
The machine is applied to large stone column contracts for highways, railways, airports and heavy industrial plants, and to foundation treatment under dams, sluices and pumping stations where coarse granular strata must be densified.
Our engineers can compare your current stone consumption with the projected figure for this configuration before you commit. Request a technical review with your soil report and specified column spacing.